Short answer: Use car wash soap if you have a hose and time, rinseless if your car is dirty and you have no hose, and waterless for dust and quick touch-ups. The best car wash options all share one rule: remove grit before contact. CeraSlick’s MilliWash line covers all three with a 3rd Gen Spray-to-Runoff method.
The Best Car Wash Options at a Glance
| Car wash soap | Rinseless | Waterless | |
| Hose needed | Yes | No | No |
| Best for | Full washes | Moderate to heavy dirt | Dust and light film |
| Water used | Most | A few gallons | A sprayer or two |
| CeraSlick product | Polymer Wash & Wax | MilliWash Rinseless | MilliWash Waterless |
What They Have in Common
All three rely on surfactants that hold soil in micelles¹ and polymers that lubricate the towel. Polymer layers in water have measured friction coefficients below 0.001.² None of them makes bad technique safe. NIST researchers report that mars come most often from car washing.³
How to Choose Among the Best Car Wash Options
- Driveway and hose:car wash soap.
- Apartment or water restrictions:
- Garage queen or quick touch-up:
The 3rd Gen Difference
Every CeraSlick MilliWash product uses a third-generation process called Spray-to-Runoff. You spray each panel until runoff carries loose grit away before you touch it. Less dirt at contact means fewer scratches. With MilliWash Waterless and Rinseless, that’s how 3rd Generation washing handles heavily soiled cars without a garden hose; older-generation products tell you to hose off heavy dirt first, so they aren’t truly apartment-friendly.
Every 3rd Gen MilliWash concentrate mixes at 1 mL per gallon, four pumps of the 0.25 mL cap, which is where MilliWash gets its name.
Picking From the Best Car Wash Options
Match the product to your space, then follow the same grit-first method. Compare all three of the best car wash options in CeraSlick’s 3rd Gen lineup.
Footnotes
- Shah A, et al. “Micelles as Soil and Water Decontamination Agents.” Chemical Reviews116, no. 10 (2016): 6042–74. doi:10.1021/acs.chemrev.6b00132
- Raviv U, et al. “Lubrication by Charged Polymers.” Nature425 (2003): 163–165. doi:10.1038/nature01970
- “To Improve Auto Coatings, New Tests Do More Than Scratch the Surface” (2018), on Feng L, et al., Progress in Organic Coatings125 (2018): 339–347.